Two diaphragm pump.
maximum flow 14 gpm.
maximum pressure 550 psi.
Detailed Description
Hypro D50 two diaphragm pump.
The Hypro D50 diaphragm pump is designed to be the most complete pump for the spraying and pumping of herbicides, pesticides, liquid fertilizers and hard-to-handle fluids.
This Hypro diaphragm pump offers a wide spectrum of flows and pressures for slurries and suspensions. The oil bath design and premium-quality, synthetic diaphragms provide longer life and greater reliability.Low-cost maintenance and almost wear-free operation result from these diaphragms,as well as, a self-priming operation, and visual oil-level sight glass.
This Hypro D50 diahpragm pump can handle fluids up to 140 degrees F and can be run dry. Easily adaptable to PTO, hydraulic or gas engine drives.
Maximum flow 14 gpm.
Maximum pressure 550 psi.
Maximum rated speed 550 rpm.
****Available with Thru Shaft ---it is 1" solid on the Hypro D50AP-A *****
Kit 1642 is to attach a Hypro D50 to a 18 HP gas engine with a 1 inch shaft.
Kit 1640 can be used providing that pump is operated at lower pressuresthat do not exceed 5.5HP gas engine capabilities.
Recommended Regulator for a Hypro D50 is a GS40GI.
Another common use of the Hypro D50 pump is for pressure testing pipes and sewers. Hydrostatic test pump
If you would like to attach your Hypro D50 to the 6 spline male PTO shaft on the back of a tractor, add 9910-Kit1704 to your order. The kit includes all the hardware, a safety shield and female PTO coupler.
True Blue is a non-toxic, environmentally friendly, water soluble dye formulated to reduce sunlight penetration and impart a natural blue colour when applied to ponds, lakes and fountains.