|
The Hypro D30 Diaphragm Pump is a long lasting, high performance and versatile pump at a very competitive price. It is the lawn care industry standard. 8.5 gallons per minute. Rittenhousestocks all replacement parts.
The Hypro D30GRGI is a D30 coupled with a Gearbox and Regulator ready to attach to a gas engine. For a complete Hypro D30GRGI and Honda Engine see the link below in Related Products.
Commonly used in agricultural applications for a weed sprayer. Can be powered by small gas engines (ie. Honda 5.5 horsepower engine) or PTO driven ( extra kit will be needed ) or adapted with belts and pulleys with an electric motor.
In all machines with moving parts, some frictional wear is inevitable. This is no exception with the high-quality pumps manufactured by Hypro--especially under heavy use by professionals. Therefore, we recommend purchasing a repair kit for this pump at the same time you purchase the pump so that you have it on hand when (and if) you need it.
The AP-A has a through shaft. This means the D30 has an extra shaft coming out of the back of the pump to drive a fan or mechanical agitation. The AP-A is less common than the standard .
Also known as the AR30.
- Duplex diaphragm pump.
- 8.5 gpm, 550 psi.
- Shipping weight 23 lbs.
- To adapt to a gas engine: order KIT 1640 (also known as KIT 1636).
- To adapt to PTO driven: order Kit 1700. In the PTO shaft kits below.
- Hypro D30AP-A is a 2 diaphragm pump - 1" HB inlet, 1/2" HB outlet; 3/4" solid extended shaft. Select shaft kit with base or gear reduction.
- The most common regulator for the D30 is the 9910-GS40GI, you cannot use a diaphragm pump without regulator.
The Hypro is the workhorse of the turf care industry and is highly recomended by Rittenhouse.
Another common use of the Hypro D30 pump is for pressure testing pipes and sewers. Hydrostatic test pump.
If you would like to attach your Hypro D30 to the 6 spline male PTO shaft on the back of a tractor, add 9910-Kit1704 to your order. The kit includes all the hardware, a safety shield and female PTO coupler.

Shown above is the 3 bolt flange of the bare Hypro D30.
|